Table of Contents
Advertisement
Custom Setup
OSD Language: Set the on screen display language
Encoding: Select the subtitle type (for compatible movie files).
Logo Type: Select a background picture from internal memory to use as the default
background.
Repeat Mode: Select how you wish your pictures to repeat. Select one to repeat
the same file, folder to only repeat the contents of the current folder or all to repeat
all available files.
USB Source: Set the USB port as a "host" if you are connecting to a USB memory
device or "device" if you are connecting it to a computer.
Default: Reset the photo frame back to factory defaults.
Exit: Return back to the Start-up menu.
Troubleshooting
Issue
The power adapter isn't plugged in
correctly.
No Power
The photo frame is not turned on
Files are in the wrong format
Pictures will not
Memory device is incorrectly
play
formatted
Memory device is incorrectly inserted
Black lines
Aspect ratio of the picture does not
around some
match the photo frame
pictures
Note : Unit with built-in 2GB flash memory, supports max JPEG file size 64M, max Video
file size 720*576, supports up to 16GB USB/SD capacity.
Cause
12
Solution
Check the power cable is
properly connected and the
power point is turned on.
Turn the photo frame on at the
back of the unit.
Check the files types you are
using are compatible with the
photo frame.
Ensure that the memory device
you are using is formatted as
FAT32.
Ensure that your memory
device is correctly inserted.
This is the digital frames way of
displaying a picture without
stretching/distorting it.
Advertisement
Table of Contents
