Filter Queen Majestic High-Filtration Surface Cleaner Owner's Manual page 15

Do It Yourself Service Chart
Problem: Power Nozzle does not operate or pick up
Cause:
Power Nozzle on/off switch is
"O" off
Hose plugs not connected
Brush is not turning
Obstructed neck
Obstructed wand
Obstructed hose
Worn Brush
Circuit Breaker Tripped
Problem: Squeaky rollers on Power Nozzle
Apply liquid wax on axles of rollers.
Correction:
Move Power Nozzle on/off switch to
"I" on.
Review instruction on attaching the
Power Nozzle, making sure all plugs
are firmly connected.
Make sure all electrical plugs are firmly
connected. Push reset button on back of
nozzle. If this does not work, call your
local FILTERQUEEN
Run a wire through opening.
Run long wire or a straightened coat
hanger through wand.
Remove hose from inlet and attach to
exhaust port to blow out clogged debris.
If this does not work, run a broom han-
dle through hose.
Call your local FILTERQUEEN
for service.
Unplug cord and check for an obstruc-
tion. After obstruction is cleared, push
reset button on back of nozzle. If this
does not work, call you local
FILTERQUEEN
14
® Distributor for service.
® Distributor
® Distributor for service