High-resolution microscope camera, megapixel digital video flex, network ready camera, megapixel digital vision viewer, digital prepscope, digital comprehensive scope, memory scope (24 pages)
External Applications Dependant upon the model you have purchased, your MVP camera has connections for a number of different External Applications. MVP-50 MVP-100 MVP-150 S-Video Out External Microphone...
Page 3
MVP-50 MVP-100 MVP-150 Projectors-LCD Projectors-DLP Monitors-Video Monitors-TV Audio & Video Recording- Computer Audio & Video Recording-VCR Audio & Video Recording-DVD Computer Devices- USB/Applied Vison Software Computer Devices- Network*** ***When 4 or more units are purchased, separate Network software is included in...
Your new MVP has a number of features controlled by buttons on the base of the unit which may be pressed and allow the user a quick switch between output devices during presentations. See control button operations in this manual. MVP-50 MVP-100 MVP-150 8x Digital Zoom...
Page 5
Cables Shipped with Product Your MVP is shipped with the following cables to allow quick connection to Output Devices. MVP-50 MVP-100 MVP-150 VGA Cable (5’/1.5m) Composite Video Audio Cable (12’/3.7m) USB 2.0 Cable (6’/1.8m) Connecting MVP to Various Output Devices Your MVP is designed as a multi-media friendly camera which may be connected to a variety of output devices.
Page 6
1. MVP to any Output Device which accepts a VGA input signal. (Projector, Video Monitor, TV, VCR or DVD Recorder). • Connect a VGA Cable between the MVP's MONITOR OUT plug (top) and the COMPUTER IN or VGA IN of the Output Device. •...
Page 7
• Turn the computer on and activate Applied Vision. • Image from MVP will appear on computer monitor. • Connect a VGA cable (D sub 15 pin plug) between the VGA-IN port of the MVP , and the VGA-OUT of the computer. •...
Page 8
(video) and S-Video connections). The following buttons are found on all MVP units: Key pad of the MVP-50 & MVP-100 Computer - The computer button only operates when the output of a VGA product (computer or other camera) is plugged (using a VGA cable) into the VGA-IN button.
Page 9
The following buttons are found on the MVP-50 and MVP-100, but NOT on the MVP-150: Split - Split functions to divide the image visible on the Output Device Click 1 - image divides (splits) in half, with the right half a fixed image, and the left half a live image.
Page 10
Flip - Pressing on the Flip button results in the projected image being flipped horizontally, then vertically. Pressing this button also allows creation of the same effect as Mirror on the MVP-50 and MVP-100 units. Pressing this button allows user to electronically have paper oriented in desired direction.
Page 11
MVP Specifications VGA connector Mini sub D15 - or use with a VGA, SVGA, or XGA monitors or projectors. MONITOR IN, VGA-IN (cable provided) Power Supply (Ken-A-Vision Replacement Part Number - KAVSPS) Input - 100-240v, 0.7A, 50-60 Hz Output - 12 V, 2.5A Standard 2.0 (cable provided) C-VID Standard Composite -yellow (cable provided)
Information to the User: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.