Advertisement
VIII. Hardware Specification
The following gives information on the technical and hardware
specifications of your Ken-A-Vision M Eye. Please note that the
information mentioned here may not be exactly the same with your
Ken-A-Vision M Eye.
Camera as specification is subject to change without notice.
1.3 M Eye
Camera Type
Cable
2 meter USB
Aperture Range
F2.8 and 8.0
Resolution
1280 x 960, 1024 x 768, 640 x 480
Auto Exposure
Yes
White Balance
Yes
Battery
(4) AAA
Internal memory
16MB
Memory Capacity
20 pictures @ SXGA (1280 x 960)
90 pictures @ XGA (1024 x 768)
220 pictures @ VGA (640 x 480)
70 Second video recording
67 minute voice recording
LCD Indicator status
Mode, Flash, Audio, and Speaker
Flash Modes
Red eye reduction, auto and standard
Microscope Adapter
28mm included
Software
Photo Suite III
Video Wave
Vision Explorer®
Operating System
Win 98, Win 2000, Win ME, Win XP
Computer
Pentium 166MMX minimum (266 MHz)
recommended, 32MB of RAM, XVGA video
card, 2 MB Video RAM, 200 MB Hard Drive
space
Ken-A-Vision reserves the right to make design improvements and other changes in accordance
with the latest advances in technology. There is no obligation to make changes in products
already manufactured. Patents Pending. ©2002 Ken-A-Vision Corporation
www.ken-a-vision.com
Ken-A-Vision
M Eye Digital
User's Manual
INS-MY
Camera
Model: M2013
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ken A Vision M2013
Summary of Contents for Ken A Vision M2013
- Page 1 Ken-A-Vision VIII. Hardware Specification The following gives information on the technical and hardware M Eye Digital specifications of your Ken-A-Vision M Eye. Please note that the information mentioned here may not be exactly the same with your Ken-A-Vision M Eye. Camera Camera as specification is subject to change without notice.
- Page 2 7.2 Frequently Asked Questions (FAQ): Contents Following are some basic troubleshooting tips regarding Ken-A- Vision M Eye hardware or software problems: Symptom Solution Parts of Ken-A-Vision M Eye Windows Check connection if Ken-A-Vision M Eye is properly does not plugged-in. Unplug and replug the camera. detect my Camera…………………………...
-
Page 3: General Maintenance And Safety
VII. Safety & FAQ Ken-A-Vision M Eye Introduction This chapter provides some basic troubleshooting when you encounter problems installing or using the camera. It is important that you read Parts of Ken-A-Vision M Eye first the previous chapters and the bundled software documentation before starting to find the problem. - Page 4 II. User Interface Description Icons Cutting Room ; Save image, divide video file and extract sound. 2.1 Buttons There are 4 buttons on the camera Dark Room ; Control the Brightness, Contrast and Hue. Special Effects ; Swirl, Spherize, Brighten, Tile, Relief, Ripple images. To delete Photos from camera memory, press and hold the Snap and Mode buttons Simultaneously for 3 Text Animator ;...
-
Page 5: Auto Flash
VI. Video Wave III 6.1 Installing Video Wave Operation Mode Button Continued… A. Make sure the USB cable is not connected to your computer. Insert the ! Single shot High quality with timer (1024 x 768) CD into the CD ROM of your computer. The software is self-loading. ! Single shot Super High quality with timer ( 1280 x 960) NOTE: The M Eye driver must be installed to use the camera with your ! Multiple shot ( 640 x 480) - Page 6 When the operation mode button is pressed once, it toggles the mode of operation. When the camera is first turned on, it is in the default state which is single shot (High quality). Each time the operation mode Add interesting effects in your photos. button is pressed, the mode is toggled as depicted below: Use your photo in numerous fun and practical projects.
- Page 7 V. Photo Suite III LCD Icons Continued Indicates the focus is right. Otherwise the icon flickers. 5.1 Installing Photo Suite III G. Make sure the USB cable is not connected to your computer. Insert Indicates the speaker is ON. Push Mode Button for more the CD into the CD ROM of your computer.
-
Page 8: System Requirements
2.3 System requirements: 4.2 Vision Explorer Software Icons Capture a still photo Click to take a snapshot of the live image. Ken-A-Vision Drive Photo Suite Video Wave Capture a movie Win98, 2000, Click to record a movie of the current Hardware Same Same... - Page 9 IV. Installing Vision Explorer III. Software Installation Ken-A-Vision M Eye Software consists of 5 software programs; Direct X, Photo Suite, Video Wave, Vision Explorer and Ken-A-Vision M Eye Driver. Insert the Installation CD and the following should appear: 4.1 Installing Vision Explorer Software M.
- Page 10 3.6 Checking the Device Installation 3.3 Click Install. (If Direct X 8.1 or higher is installed in your computer already Windows XP, the installation continues To check if the Ken-A-Vision M Eye has been installed: automatically). Your computer will restart after the installation of Direct X.
Need help?
Do you have a question about the M2013 and is the answer not in the manual?
Questions and answers