Advertisement
Table of Contents
Table of Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Professional services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Product registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Product returns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Unpacking Cameras. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
®
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
IDCam™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Making Connections. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
To connect camera to a TV, VCR, or projector . . . . . . . . . . . . . . . . . . . 5
To connect camera to a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
General usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Using the TeachCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Using the StudentCam and IDCam . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Camera Care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Handling the camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Operating and storage conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Camera Care
Handling the camera
• All FlexCam by Ken-A-Vision
®
cameras are for indoor use only.
• Use only a Ken-A-Vision power supply and a wall-mounted, electrical outlet.
• Do not use the cameras next to food or beverages. Cameras have been tested and
approved for use in chemistry labs. However, be very careful not to spill liquid or dry
chemicals, or solvents on the camera.
• Do not use cameras right next to working TVs, radios, motors, transformers or magnetic fields.
• Avoid touching the lens. To clear any dust, blow pressurized air onto the lens. For
accidental smears or smudges, wipe carefully with a lens cleaning cloth.
• Clean exterior of camera by wiping with a clean, damp cloth; do not use any abrasive
chemicals.
• Use both hands whenever adjusting the neck of the camera; this will avoid any
unnecessary strain on the camera's base and will keep the camera from tipping over
unexpectedly.
• Do not attempt to take the camera apart. There are no user-serviceable components inside.
Camera base
The camera base has five rubber feet for non-slip support of the camera.
Camera head
This pre-assembled unit contains the camera lens, lens holder, focus ring attachments,
connections to gooseneck and all cables. Do not turn camera head more than 30 degrees
left or 30 degrees right.
Camera lens and lens holder
The camera lens is held in place by the lens holder. Both are permanently attached to the
camera head. Do not try to rethread or unscrew the lens holder.
Gooseneck
Use the gooseneck to adjust the camera head/camera lens over the projected image. Do
not bend the gooseneck more that 90 deg. in any direction or attempt to tie it in a knot. Do
not attempt to repair any cracks in the vinyl coating. The gooseneck is non-detachable and
should be replaced only by Ken-A-Vision.
Warnings
• Internal thermal protection is built-in. Use only the provided power supply. Using a
different power supply will void the warranty.
• Do not loosen or remove exterior assemblies (keypads, electrical connectors, audio
units, or camera lens).
• Do not disassemble any exterior or interior components of any camera.
• Any camera lens will be permanently damaged if it is over-tightened.
Camera Care
9
Advertisement
