INSTALLATION GUIDE
Precautions:
1. This unit should be install by qualified technician or service personnel.
2. This product is designed to operate with a 12V DC, negative ground
battery system.
3. Disconnect the ground wire from the battery terminal before connecting
this unit to the electrical system.
4. The wiring from some other products or accessories might bear similar
color code to this product but however they might of different function.
It is always advisable to refer to the electrical connection diagrams of
products or accessories before installation to avoid wrong connection.
5. Use proper insulation and fastening materials to prevent electrical
short-circuiting.
6. Do not connect the yellow wire of this product directly to the battery
terminal. Do remember to connect the red wire of this product to the
ACC of the ignition key switch. Failure to do so may result in draining
off the battery charge prematurely.
7. Use only supplied accessories to avoid damaging the unit during
installation.
8. Do not install this product at a position that may cause injuries to the
passenger(s) during an accident.
9. However, due to different car specification, kindly ensure that the display
monitor is suitably located such that it is not obstructing the rear view
mirror or air-conditioning unit.
10. Do not install this product at a declining angle exceeding 30.
11.D o not install scr ews over plane surface which may affect monitor eject
or retract function.
3
Need help?
Do you have a question about the Roof Mount Color Monitor and is the answer not in the manual?