Roland SPD-S Owner's Manual page 145

Sampling pad
Hide thumbs Also See for SPD-S:
Table of Contents

Advertisement

Added Information
Wave Protect
This feature of SPD-S provides protection to sampled waves to prevent them from being lost by mistake.
Its factory setting is ON (enabled).
When you need to DELETE waves from internal memory or card memory, wave protect must be set to OFF.
When wave protect is ON, some operations cannot be executed with a "wave protected!" message indicated.
For more information, refer to p. 88 of the SPD-S Owner's Manual.
Errata
We apologize for the following errors in the SPD-S Owner's Manual. Please make the corrections listed below.
• P.52. Replace the "Sampling Time" table for "To a memory card" with the following table.
Card capacity
LONG
16 MByte
Approx. 12 minutes
32 MByte
Approx. 24 minutes
64 MByte
Approx. 48 minutes
128 MByte
Approx. 1 hours 36 minutes
256 MByte
Approx. 3 hours 13 minutes
512 MByte
Approx. 6 hours 26 minutes
Recommended CompactFlash
Roland has tested and confirmed the operation of the following CompactFlash products.
Maker
LEXAR
HAGIWARA SYS-COM
HITACHI
SST (Silicon Storage Technology, Inc.)
* CompactFlash products other than the ones listed above may not work correctly in the SPD-S.
SPD-S
STANDARD
Approx. 6 minutes
Approx. 12 minutes
Approx. 24 minutes
Approx. 48 minutes
Approx. 1 hours 36 minutes
Approx. 3 hours 13 minutes
Model number
CF*** 8X USB (***: card capacity)
Z series
C6 series
SST48CF032 (32 MByte)
FINE
Approx. 3 minutes
Approx. 6 minutes
Approx. 12 minutes
Approx. 24 minutes
Approx. 48 minutes
Approx. 1 hours 36 minutes
03341801
1*RCC

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents