Jeep Patriot Owner's Manual page 33

Automatic Unlock Doors On Exit Programming
The Automatic Unlock Doors On Exit feature can be
enabled or disabled as follows:
For vehicles equipped with the EVIC, refer to "Elec-
tronic Vehicle Information Center (EVIC) — If
Equipped/Personal
Programmable Features)" in "Understanding Your In-
strument Panel" for further information.
For vehicles not equipped with the EVIC, perform the
following procedure:
1. Close all doors and place the key in the ignition.
2. Within 15 seconds, cycle the ignition switch between
LOCK and ON/RUN and then back to LOCK four times
ending up in the LOCK position (do not start the engine).
Settings (Customer-
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 31
3. Within 30 seconds, press the power door UNLOCK
switch to unlock the doors.
4. A single chime will indicate the completion of the
programming.
5. Repeat these steps if you want to return this feature to
its previous setting.
NOTE:
If you do not hear the chime it means that the system
did not enter the programming mode and you will
need to repeat the procedure.
Use the Automatic Unlock Doors On Exit feature in
accordance with local laws.
2