Change A Channel Or Frequency; Radio Broadcast Data System (Rbds) - Chrysler MULTIMEDIA SYSTEM User Manual

In order to store the desired station, touch and hold one
of the station preset soft-keys for two seconds and you
will see the highlighted soft-key change from green to
beige. You will also see the radio station stored in the
highlighted soft-key, and you will hear a confirmation
beep when the station is saved.

Change a Channel or Frequency

Press the seek/tune down arrow soft-key
seek down to the next available station or channel.
Press and hold the seek/tune down arrow soft-key
to tune down until the soft-key is released.
Press the seek/tune up arrow soft-key
seek up to the next available station or channel.
Press and hold the seek/tune up arrow soft-key
tune up until the soft-key is released.
Select the DIRECT TUNE soft-key to enter a frequency or
a channel number, and confirm your selection by press-
ing the GO soft-key.
Select SCAN for a five-second preview of each listenable
station in the frequency band. Touch the SCAN soft-key
again to stop the scan function and to select a radio
station.
to quickly

Radio Broadcast Data System (RBDS)

This radio system is capable of receiving RBDS signals in
the FM band. RBDS is a technology used for transmitting
textual information about the music type, song and artist
for FM band music. This information is shown on the
to quickly
display.
NOTE: Not all radio stations support RBDS.
to
The RBDS information is displayed below the frequency
reading of the currently playing radio station.
MULTIMEDIA 17