Change The Language; Set The Time; Getting Started - Chrysler MULTIMEDIA SYSTEM User Manual

GETTING STARTED

NOTE: The ignition switch must be in the ON or ACC
position to operate the radio.
If the unit is OFF, switch it ON by pushing the ON/OFF
VOLUME rotary knob.

Change the Language

The radio will conform to the vehicle language set in the
Electronic Vehicle Information Center (EVIC), if
equipped.
If you change the language in the radio, the vehicle will
change the language for all display information. Refer to
the vehicle's Owner's Manual on the DVD.
To change the language with the radio:
1. Press the MENU hard-key on the right side of the
radio.
2. Then press the System Setup soft-key to get to the
System Setup menu.
3. Press the Language soft-key and select a language.

Set the Time

1. Press the Time display in the lower left corner of the
screen.
MULTIMEDIA 13