Electronic Vehicle Information Center (Evic) - Jeep Grand Cherokee User Manual

ELECTRONICS
Operation Of The Remote
• The remote control operates similarly to any DVD remote you have used before and
allows the rear seat passengers to change stations, tracks, discs and audio/video
modes.
• The remote control is designed to control either channel by using the selector
switch located on the right side of the remote.
• Pressing the power button will turn the VES™ system ON/OFF.
• Pressing the MODE button causes the Mode Selection menu to appear on the
VES™ screen. Use the remote control arrow buttons to scroll through the available
modes, then press ENTER to select the desired mode.
Auxiliary Audio/Video Input Jacks
• The Aux jacks are located on the rear of the center console.
• Connect the video game or other external media devices to the AUX jacks following
the color coding for VES™ jacks.
• Using either the touch-screen radio or remote control, select AUX from the Rear
VES™ Control or Mode Selection screen.
• Refer to your vehicle's Owners Manual on the DVD for further details.
ELECTRONIC VEHICLE INFORMATION CENTER
(EVIC)
• The EVIC features a driver interactive
display that is located in the instru-
ment cluster. Pressing the controls
on the left side of the steering wheel
allows the driver to select vehicle infor-
mation and Personal Settings. For ad-
ditional information, refer to Program-
mable Features in this guide.
• Press and release the UP
scroll upward through the main menus
(Fuel Economy, Vehicle Info, Tire PSI,
Cruise, Messages, Units, System Setup)
and sub menus.
• Press and release the DOWN
and sub menus.
• Press and release the SELECT
to select a personal setting in the setup menu.
• Press the BACK button to scroll back to a previous menu or sub menu.
82
button to
button to scroll downward through the main menus
button for access to main menus, sub menus or