Troubleshooting
Problem
likely cause
Verro does
The filter bag needs to be
not cover the
cleaned
entire pool
The brushes, drive
belts or drive tracks
need replacing
The floating power cord
is preventing Verro
from reaching all parts
of the pool
The pump impeller is
fouled
Verro gets
The floating power cord is
stuck on its
twisted
floating power
cord
0
iRobot Verro Owner's Manual
(cont...)
what to do
Clean the filter bag. (p. 12)
Replace drive belts and treads. (p. 16)
Use the Detangler to untwist the floating power cord.
Position the Power Supply 12 feet away from the center
one of the long sides of the pool.
Ensure the floating power cord is not getting caught.
Consider repositioning the Power Supply to keep the
floating power cord away from objects on which it may
get caught.
Clean the impeller. (p. 18)
Use Detangler to untwist the cord. (p. 17)