Auxiliary Audio Source - Rockford Fosgate iPOD Interface Module Installation & Operation Manual

Connecting
The interface is equipped with a 1/8" AUX jack input to connect an auxiliary device, such as
an MP3 player, DVD player or other audio source.
NOTE: We recommend to only connect to the interface module when the vehicle ignition
is turned off.
Connect into the interface module from
your auxiliary device with a cable that
has a 1/8" mini stereo jack (not included).
Selecting AUX Input
To access the AUX audio source, select DISC 5, Track 2 or Preset 5, Channel 2 (depending
on the radio model).
AUX audio source settings
The auxiliary input has settings for Gain (volume), Bass, Mid and Treble for optimizing sound.
Gain (Volume) should be adjusted if the audio level from the auxiliary device is too low or
too high. If you hear distorted audio while playing the auxiliary device, you need to reduce (-)
the gain. If you notice that the audio is too quiet then the gain setting should be increased (+).
The default setting for gain is "68" and may be adjusted in increments between 01-99.
Bass, Mid and Treble default settings are "50" and can be adjusted between 01-99 to
compensate for the acoustic presets of the radio.
Making the adjustments
While listening to the auxiliary device, use the DISC or PRESET buttons (depending on the
radio model) to move between the settings as follows;
DISC (PRESET)-1 for Gain (Volume)
DISC (PRESET)-3 for Mid EQ
Then use the TUNE or SEEK button to adjust the setting (depending on the radio model
the TUNE knob can be rotated for this function).
NOTE: If you are using an auxiliary device that is using the vehicle's power source and not its
own battery, you may have to use a GROUND-LOOP isolator to avoid engine and
grounding noise.
10

Auxiliary Audio Source

DISC (PRESET)-2 for Bass EQ
DISC (PRESET)-4 for Treble EQ
Interface Module
1/8" AUX
connector