Introduction; Rf Punch Woofer Contents; Technical Design Features - Rockford Fosgate RFR-1410/1810 Operation & Installation

I
N T R OD U C T I O N
The Power 10", 12" and 15" woofers are low frequency drivers
designed primarily for use in small to medium ported enclosures
and are available in 4 or 8 ohm impedance. By utilizing the latest
materials and construction techniques, we are able to offer a
speaker with high output at low frequencies while requiring a
minimum of operating space.
RF P
UNCH
Power Woofer
Installation & Owner's Manual
T
ECHNICAL
Cast Aluminum Frame
The cast aluminum frame offers increased stability over a stamped
steel frame to reduce any flexing. This frame offers the lowest
coloration of sound due to the added strength.
THE RESULT: Extremely rigid frame which reduces flexing
PVA Cone
The cone material used is spruce pulp paper. This provides the
necessary combination of weight and strength and allows high levels
of output without cone break up. The cone is treated with a water
resistant PolyVinyl Acetate (PVA) Emulsion which increases the cone
rigidity and lowers distortion.
THE RESULT: Increases cone rigidity and lowers distortion
Santoprene Surround
Santoprene is a very durable and temperature tolerant material which
provides a consistent support necessary for the linear motion of the
speaker cone. In addition, the damping capabilities eliminate the
transmission of sonic disturbances between the cone and the frame of
the speaker. This greatly improves the accuracy of the woofers low
frequency response.
THE RESULT: Improves woofer's low frequency response
W
OOFER
D
E S I G N
– 1 –
C
ONTENTS
F
E AT U R E S