Humminbird SC 110 Autopilot Installation And Operation Manual page 20

Menu
NAV2 Function
O Course Timeout Sets the amount of
Info Display
Tiller Control
Function
Minimum Rudder
Description
Sets the function of
the equipment
connected to NAV2 in
the CPU.
time (in seconds)
before the o course
alarm will begin to
sound or display on
the screen when the
vessel has moved
more than 20° o
course.
Sets the GPS readout
displayed on the right
side of the screen.
Auto mode only.
Adjusts the rudder
setting from the tiller
control function.
Sets the value (in
degrees) that the
autopilot will add to
any given rudder
command. This
feature can make the
vessel more
responsive to
autopilot commands,
especially when it
does not respond to
small deflections of
the rudder because of
its mid-ship position
(e.g. waterjet
propulsions).
14
Settings
Disabled: O
Nav2: Chartplotter (#2)
Wind: Wind Sensor
Default: Wind
Disabled: O
10s to 120s
Default: 30s (30 seconds)
SOG: Speed Over Ground
COG: Course Over Ground
Standard: Temporary Dodge
1° to 30° (Adjusts the heading
by the set amount)
Default: Standard
0.0° to 3.0°
Default: 0.0°