Advertisement
Advertisement
Table of Contents
Related Manuals for Rega TT PSU
Summary of Contents for Rega TT PSU
- Page 1 TT PSU MANUAL.qxd 03/08/2004 14:43 Page 1 TTPSU...
- Page 2 There are two different versions of the TT PSU (power supply unit): P7 TT PSU - this is supplied with ALL P7 turntables and for the upgrade of the P5 50Hz. P5 60Hz (USA) TT PSU - this is supplied for the upgrade for the P5 Turntable where the line &...
- Page 3 Setup - Getting Started Remove all Packaging. IMPORTANT: when up-grading the P5 make sure the Rega PSU 1 is dis- connected from the turntable power socket before connecting the TT PSU. Connect the turntable power interconnect from the TT PSU into the turntable.
- Page 4 TT PSU off as well (see Setup - getting started section for information on the P5 60Hz...
- Page 5 TT PSU MANUAL.qxd 03/08/2004 14:43 Page 5 To switch off at any time, simply press the power switch on the back of the TT PSU. To minimise the risk of hum pick up by the cartridge, the power supply should be situated as far from the P5/7 as the interconnect cable will allow.
- Page 6 - if these are shorted it will cause damage to the power unit. Do not connect both the P5/7 up-grade power supply box and the Rega PSU1 power supply to the turntable - this will damage the P5 PSU unit.
-
Page 7: Specifications
Page 7 Specifications The all new TT PSU and motor anti-vibration circuit is a combination of the innovative P9 power supply along with an improved P25 anti-vibration motor drive feeding the P9 24V AC synchronous motor. The TT PSU uses a remote "wall wart"... - Page 8 TT PSU MANUAL.qxd 03/08/2004 14:43 Page 8 Precision crafted by Rega Research Ltd. England www.rega.co.uk Rega Research Ltd 119 Park Street Westcliff-On-Sea Southend, Essex SSO 7PD...
Need help?
Do you have a question about the TT PSU and is the answer not in the manual?
Questions and answers