Advertisement
Remove cut-outs before fixing the box. Where appropriate drill the box to provide close
fitting entry for cables and heat-resistant flexible cords. Take care to remove sharp edges.
All un-insulated earth conductors must be sleeved and connected to the earth terminals on
the back of the Electrisaver.
The supply Earth conductor and appliance Earth conductor must use the separate terminal
connections provided.
Clamp all surface wiring to the wall adjacent to the Electrisaver or use trunking where
appropriate.
The flexible cord to the appliance should be passed through the cable entry hole in the
bottom edge of the Electrisaver, and secured under the cable clamp provided.
Ensure that the clamp is positioned the right way up ie. the projections on the underside of
the clamp should grip the cord in order to secure the cable firmly, the cable clamp screws
must be adequately tightened.
Carefully offer the Electrisaver to the moulded/metal box and secure using two M3.5
captive screws provided. Do not damage insulation or trap the conductors during this
operation.
Finally switch on the mains supply, ensure the Electrisaver operates correctly.
4
Advertisement
