Propeller And Shear Pin Replacement - Honda Marine BF5A Owner's Manual

Propeller and Shear Pin
Replacement
A shear pin is used to protect the
propeller and drive mechanism from
damage when the propeller strikes an
obstruction.
Before replacing the propeller or the
shear pin, remove the emergency
stop switch clip from the emergency
stop switch to prevent any possibility
of the engine being started while you
are working with the propeller.
The propeller blades may have sharp
edges, so wear heavy gloves to
protect your hands.
Operating the outboard motor at
higher altitudes will reduce available
power. This may require decreasing
the propeller pitch to maintain correct
engine RPM.
SERVICING YOUR OUTBOARD MOTOR
Removal
PROPELLER CAP
COTTER PIN
SHEAR PIN
1. Remove the cotter pin, the
propeller cap, and the propeller.
2. Remove the broken shear pin and
replace it with a new one.
57