Table of Contents
Advertisement
If the indicated maintenance service
is not done and the remaining engine
oil life reaches 0%, the multi-
information display will show the
message ''SERVICE PAST DUE'' and
the maintenance item code(s). This
message is displayed when the total
distance traveled is less than 10
miles (for U.S. models) or 10 km (for
Canadian models) after the engine
oil life became 0%.
These messages will come on every
time you turn the ignition switch to
the ON (II) position.
Immediately have the service
performed, and make sure to reset
the oil life minder as previously
described.
The message will be canceled if the
or
button on the steering wheel
is pressed. Press the
or
to see the message again.
Maintenance Minder
button
Press the SEL/RESET button on the
steering wheel repeatedly to select
the engine oil life. The message
''SERVICE'', along with ''0%'', and the
maintenance item code are displayed
on the lower part of the multi-
information display when the
calculated engine oil life is 0－1%.
TM
CONTINUED
413
Advertisement
Table of Contents
