Table of Contents
Advertisement
Keyless Lock Acknowledgement
When you press the UNLOCK
button on the remote transmitter to
unlock the doors and the tailgate, the
exterior lights blink twice to verify
that the doors and the tailgate are
unlocked and the security system is
turned off.
When you push the LOCK button on
the remote transmitter, some
exterior lights flash, and a beeper
sounds when you push the LOCK
button again within 5 seconds to
verify that the doors and the tailgate
are locked and the security system
has set (see page 294). You can
customize the exterior lights not to
flash and the beeper not to sound.
While ''DOOR SETUP'' is shown in
the ''CUSTOMIZE GROUP'' of the
multi-information display, press the
SEL/RESET button. The screen
changes to ''CUSTOMIZE MENU.''
Press the INFO ( / ) button until
you see the above display.
Multi-Information Display
Press the SEL/RESET button. The
screen changes as shown above.
Select ''ON'' or ''OFF'' by pressing
the INFO ( / ) button, then press
the SEL/RESET button to enter your
selection.
CONTINUED
107
Advertisement
Table of Contents
