Driving To Your Destination; Calculate Route To Screen - Honda GPS Navigation Navigation Manual

Driving to Your Destination

Driving to Your Destination
A route typically has three phases.
• Initial route calculation (Calculate
route to screen) (see page 46).
• Change the route while en route
(see page 65).
• Resume the route when restarting the
engine (see Continue Trip Screen on
page 69).
46
Navigation System

Calculate Route to Screen

Say or select OK. The system calculates
the route using the method shown on the
screen (see Map Screen on page 49).
NOTE:
• Prior to departure, you can set areas
to avoid. The system then includes
them in its calculations for the
destination you have entered. See
Edit Avoid Area on page 91.
• For information on the available
voice commands, see Voice
Command Index on page 140.
Further selections from the Calculate
route to screen include:
ADD TO Address Book
Allows you to add the destination to
your Address Book. See By Address
Book on page 27.
NOTE:
If EDIT Address Book is displayed,
the destination is already stored in your
Address Book. You can edit the address
in your Address Book by selecting this
button. For information on editing your
Address Book, see Address Book on
page 79.
ADD TO Today's Destinations
Allows you to add the destination to
your Today's Destinations list. See By
Today's Destinations on page 43.
NOTE:
If the button is grayed out, the Today's
Destinations list is already full (five
destinations have been stored).
CALL
Dials the number on the screen when
available. See Bluetooth®
HandsFreeLink® on page 18.