Honda GPS Navigation Navigation Manual page 130

Problem
When I drive at night, the screen is bright and will not switch
to the night display mode. Why?
The daytime map screen is dark like the night display mode,
and it is hard to see. Why?
How can I input my destination using map coordinates?
How do I change or remove my PIN?
I forgot the PIN for Home, or the PIN for personal addresses
(User 1 or User 2). How do I reset it?
CALL is not available on the Calculate route to screen.
Why?
Verify the following: The nighttime dash brightness control is not set to
maximum, and Map Color in SETUP is set to Black for Night. See
Switching Display Mode Manually on page 99.
Verify the following: The Map Color in SETUP is set to White for Day.
See Switching Display Mode Manually on page 99.
The navigation system was not designed for this. However, you can view
the coordinates of an address by pushing in on the Interface Dial, selecting
Show Icon on Map, and moving the Interface Dial left to select
Current Location. See Map Screen Legend on page 51.
Go to "Personal Information" in the SETUP screen (Other), and select PIN
Number. Select User 1 or User 2 and enter your existing PIN, and then
you have the choice to change or remove the PIN. See page 83.
PINs are optional. See information regarding PINs on page 83. Your dealer
can reset the PIN for you.
Your phone is not paired to HFL, or if your phone is paired, it is in use or
does not have good coverage; press the HFL BACK button.
Frequently Asked Questions
Solution
Navigation System 129