Honda Insight Owner's Manual page 70

Instrument Panel Indicators
U.S. Canada Brake System
Indicator
(Amber)
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position, and START (III) position.
When the brake system indicator
(amber) comes on and stays on,
there is a problem with the Creep
Aid System or Brake Assist (the
normal brake operates properly).
Have your vehicle checked by your
dealer. For more information, see
page 287 .
You will also see a ''CHECK BRAKE
SYSTEM'' message on the multi-
information display (see page
64
Anti-lock Brake System
(ABS) Indicator
This indicator normally comes on for
a few seconds when you turn the
ignition switch to the ON (II)
position. If it comes on at any other
time, there is a problem with the
ABS. If this happens, have your
vehicle checked at a dealer. With
this indicator on, your vehicle still
has normal braking ability but no
anti-lock function. For more
information, see page
You will also see a ''CHECK ABS
SYSTEM'' message on the multi-
information display (see page
89 ).
This indicator comes on briefly when
you turn the ignition switch to the
ON (II) position. If it comes on at
any other time, it indicates a
potential problem with your front
airbags. This indicator will also alert
you to a potential problem with your
airbag system components. For
more information, see page
289 . You will also see a ''CHECK
AIRBAG SYSTEM'' message on the
multi-information display (see page
89
89 ).
Supplemental Restraint
System Indicator
).
34 .