Honda Insight Owner's Manual page 248

Bluetooth HandsFreeLink (Models without navigation system)
To change your security passcode:
Press and release the HFL Talk
button before a command.
1. Say '' .''
System setup
2. Say ''
Change passcode
prompts.
3. Follow the HFL prompts and say
the new 4-digit passcode.
4. Follow the HFL prompts to
confirm the number.
242
To select either a ring tone or a
prompt as the incoming call
notification :
Press and release the HFL Talk
button before a command.
'' after the 1. Say ''
System setup
2. Say ''
Call notification
prompts.
3. Follow the HFL prompts and say
''
Ring tone
can also say ''
incoming call notification.
: The default setting is a ring tone.
.''
'' after the
'' or '' .'' You
Prompt
'' for no audible
Off
To activate or deactivate the auto
transfer function:
If you get into the vehicle while you
are on the phone, the call can be
automatically transferred to HFL
with the ignition switch in the
ACCESSORY (I) or ON (II) position.
Press and release the HFL Talk
button before a command.
1. Say '' .''
System setup
2. Say '' '' after the
Auto transfer
prompts.
3. HFL will let you know if auto
transfer is on or off, depending on
the previous setting. Follow the
HFL prompts to change the
setting.