Switching Source Signals; Adjusting The Volume - HANNspree WT05-10A1 User Manual

Switching Source Signals

Press the SOURCE button on the
remote control or the TV button on
the control panel to select the incom-
ing source signal.The current source
setting CH xx appears on the top left
corner of the screen; AV1 or AV2
appears on the bottom right corner of
the screen.
Note:
The TV supports S-Video input in
addition to normal video and audio signals. The TV detects the signal type
automatically and gives priority to S-video when two signals are detected
at the same time. This auto detection function is only available for AV2.

Adjusting the Volume

Press the VOL UP button to increase
the volume. Press the VOL DOWN
button to decrease the volume. The
volume level is displayed on the TV.
Press the MUTE button on the remote
control to turn the sound off. The word
"Mute" appears on the top left corner
of the screen and sound is tempo-
rarily turned off.
Press the MUTE button on the remote
control or press the VOL UP button or the VOL DOWN button to
restore the original volume.
Current source setting
C H 4 0
M
TV
Mute
M
TV
Volume up
down
Volume
TV/AV
A V 1
TV
27