Honda Accord Coupe Owner's Manual page 371

Lights
6. Install the new bulb, and turn it
one-quarter turn clockwise to lock
it in place.
7. Push the electrical connector onto
the bulb.
8. Turn on the headlights to test the
new bulb.
9. Put the inner fender cover in place.
Install the two holding clips. Lock
each one in place by pushing on
the center.
368
Replacing a Front Turn Signal/
Parking Light Bulb
V6 model is shown.
1. Open the hood.
To change the turn signal bulb on
the passenger's side, remove the
engine coolant reserve tank by
pulling it out of its stay.
Driver's side on V6 models
Remove the air intake duct (see
page 366 ).
2012 Accord Coupe
2. Remove the socket from the
STAY
headlight assembly by turning it
one-quarter turn counterclockwise.
3. To remove the burned out bulb,
push it in and turn it
counterclockwise until it unlocks.
BULB