Honda Accord Coupe Owner's Manual page 157

Playing Discs (Models without navigation system)
To Play a Disc
To load or play discs, the ignition
switch must be in the ACCESSORY
(I) or ON (II) position.
You operate the disc changer with
the same controls used for the radio.
To select the disc changer, press the
CD/AUX or CD button. You will see
''CD'' in the display. The disc and
track numbers, and the elapsed time
are shown in the display. You can
also select the displayed information
with the TITLE button (see page
155 ). The system will continuously
play a disc until you change modes.
Do not use discs with adhesive labels.
The label can curl up and cause the
disc to jam in the unit.
154
This audio system can also play
CD-Rs and CD-RWs compressed in
MP3 or WMA format. When playing
a disc in MP3, you will see ''MP3'' in
the display. In WMA format, ''WMA''
will appear in the display. The disc,
folder and track numbers are
displayed. You can select up to 255
folders or tracks.
Depending on the software the files
were made with, it may not be
possible to play some files, or display
some text data.
Video CDs and DVDs do not work in
this unit.
NOTE:
If a file on a WMA disc is protected
by digital rights management
(DRM), the audio unit displays
UNSUPPORTED, and then skips to
the next file.
2012 Accord Coupe
Loading Discs
Your vehicle's in-dash disc changer
holds up to six discs.
1. Press the LOAD button until you
hear a beep and see ''LOAD'' in
the display. To load only one disc,
press and release the LOAD
button.
2. The disc number for an empty
position begins blinking.
3. Insert the disc into the disc slot
when the green disc load indicator
comes on. Insert it only about
halfway; the drive will pull it in the
rest of the way. You will see
''BUSY'' in the display while the
disc load indicator turns red and
blinks as the disc is loaded.