Rearview Mirror With Rearview Camera Display - Honda Crosstour Owner's Manual

Rearview Mirror with Rearview Camera Display

REARVIEW
CAMERA DISPLAY
If equipped
You can turn the camera display on
and off by pressing the power button
when the shift lever is in reverse.
The camera display turns on every
time you shift to reverse, even if you
turned it off the last time.
Whenever you shift to reverse (R)
with the ignition switch in the ON
(II) position, the rear view appears
on a display in the rearview mirror.
278
SENSOR
POWER
BUTTON
For the best picture, always keep the
rearview camera clean, and do not
cover the camera lens. To avoid
scratching the lens when you clean it,
use a moist, soft cloth.
Since the rearview camera display
area is limited, you should always
back up slowly and carefully, and
look behind you for obstacles.
2012 Crosstour
REARVIEW CAMERA
If the engine has just been started, it
may take a short time for the system
to display the rear view.
The camera display brightness is
automatically adjusted by sensors. If
you use the camera display
continuously at high temperatures,
the image will gradually dim and
eventually turn off. If you change to
another shift position, the display
will come on again when you return
to reverse.
The inside mirror will be hot when
you use the monitor for an extended
period of time.
If a bright light (such as sunlight) is
reflected on the mirror, the image
may be difficult to see.