Table of Contents
Advertisement
REARVIEW CAMERA
For added convenience, the area behind your vehicle is displayed to help you navigate
while backing up.
How It Works
• When you shift into Reverse (R), a real-time image of the area behind your vehicle
is shown in the center display.
• Yellow parking guidelines also appear to help you judge distance.
• The rearview display turns off when you shift out of Reverse.
Turning the Guidelines On or Off
Press and hold RETURN for
about 3 seconds.
8
HOMELINK
Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired
HomeLink button and the button on
the remote transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO
YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO
YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
®
(if equipped)
3
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO
YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator
HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and
hold the programmed HomeLink
button for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
9
Advertisement
Table of Contents
