Playing Fm/Am Radio; Selecting Fm/Am Mode; Audio Screen Control - Honda 2013 ZDX Navigation Manual

Playing FM/AM Radio

Selecting FM/AM Mode

1. Press the AM/FM button.

Press the AM/FM button again, if necessary, to select the frequency band (AM,
FM1, FM2).
2. Select a station using the Preset buttons and the bars (SKIP, TUNE, SCAN/TITLE)

On the FM bands, you can also use the CATEGORY bar and SCAN/TITLE bar
(TITLE side) to select a station provided by the Radio Data System (RDS).

The band and frequency are displayed on the display.

Audio Screen Control

H AUDIO button (in FM/AM mode)
Control the audio system through the navigation screen.
Stereo indicator
Preset stations
136
1. Move e to select a frequency band
Frequency band
(AM, FM1, or FM2).
2. Rotate i to select a preset
station. Press u.
Press and hold u until a beep

sounds to store the current
station in a preset button.
Move r to select AUDIO

MENU.
2 Audio Menu
1

Playing FM/AM Radio

d "Display audio screen"
You can control the radio using voice control
commands.
2 Radio Commands P. 237
A visual guide helps you operate the audio
system.
2 System Controls P. 4
2 Basic Operation P. 6
The ST indicator comes on the display for stereo
FM broadcasts. Stereo reproduction in AM is not
available.
The radio can receive the complete AM and FM
bands:
AM band: 530 to 1710 kHz
FM band: 87.7 to 107.9 MHz
You can store six AM stations and 12 FM stations
in the preset buttons. FM1 and FM2 let you store
six stations each.
P. 137