Table of Contents
Advertisement
VHF antenna
Mixer
Antenna in jack
2.
Connect the audio sources (Including DVD, VCDR, CAMCORDER
and PC) to the proper AUDIO input jacks 'L' and 'R'.
3.
Connect the video source to the VIDEO jack by RCA cable.
4.
If the video source has a YUV output jack, you can connect the signal
to the monitor by the YUV cable.
5.
Connect the video source to the S-VIDEO input jack of the monitor by
the S-video cable (Pretended the video source has S-video output
jack).
6.
Insert the AC power to the DC adapter, then connect 12V input jack of
the monitor to it's DV output jack.
7.
When use as computer screen, connect the PC to the VGA jack of the
monitor by the relevant cable.
IV. TV/Monitor screen operation
(1) Basic operation
Press the POWER button on the unit or the STANDBY button on the
1.
remote control to switch on the power. The indication light will be in
blue color . Press the POWER or STANDBY button again to switch off
the power, and the light will be in red color.
UHF antenna
75¦¸ Co-axis cable
10
Input terminal of
antenna
Co-axis antenna
plug
75¦¸ Co-axis cable
Advertisement
Table of Contents
