Advertisement
XML S
C
URVEY
ONFIGURATION
1. Before the XML survey application can be launched, the GXP2020 firmware must be upgraded to
version 1.1.5.x.
2. After upgrading and rebooting, the XML server path on the advanced settings tab must be set to point to
the server where the application is located (i.e. 12.34.56.78/test_gs.xml). Please make note that the
account 1 page must be configured with a valid SIP account for the application to run. Reboot the phone
again.
3. When the phone boots up, the first soft key will be "XML Service". Press this key to get started. It is also
possible to enter the application server path into a web browser. This way you'll be able to see on your
screen the exact XML that your phone is receiving also. If you press a soft key on your phone, you'll
just need to navigate to the URL of the soft key, as can be seen in the XML code. For example, on
12.34.56.78/test_gs.xml, you'll see that the first soft key is set to make the phone browse to
12.34.56.78/politics_gs_start.xml. Press that soft key and enter that URL into your web browser, and
you'll be seeing the XML code on your screen and the actual displayed page on your phone. This
makes the implementation of the application relatively easy to understand.
4. Once the application is launched the first question of the survey will appear on the main body of the
GXP LCD screen. The user can then answer the multiple choice questions with the corresponding soft
key. Note: In some cases you will have to click on the "more" softkey if there are more than 4 multiple
choice answers.
5. After completing one section of the survey, the user can jump to another category or automatically go to
the next category by pressing the corresponding softkey.
6. After completing all the survey category's the application will prompt the user to exit.
Grandstream Networks, Inc.
XML Application Guide
Page 24 of 24
Last Updated: 3/2009
Advertisement
