Important Warning Messages; Camera Assembly - GoPro Hero 3 Black edition User Manual

iMPortant warninG MessaGes

miCrosD CArD messAGes
No card present. The camera requires a microSD, microSDHC or
no sD
microSDXC card to record Video or take Photos.
sD FuLL Card is full. Delete files or swap card.
sD error
Camera unable to access card.
FiLe rePAir iCon on the LCD
If you see the File repair icon on the LCD screen, your Video file
was corrupted during recording. Press any button and the camera
will repair the file.
temPerAture WArninG iCon on the LCD
The temperature Warning icon will appear on the LCD when the
camera has become too hot and needs to cool down. Simply let it sit
and cool before attempting to use it again. Your camera will not allow
itself to overheat —do not worry, no damage has occurred.
58
AssemBLinG the CAmerA
The HERO3 camera housing is waterproof to 197'/60m and is constructed of
polycarbonate and stainless steel for ultimate durability. The HERO3 has a new improved
latch closure that offers one hand open-and-close functionality and locking.
to place the hero3 camera into the housing:
1. Place camera in housing.
2. Position the backdoor into place.
3. Lift the latch arm into upright position allowing the hinged arm to
hang downward.
4. Hook grooved portion of hinged arm to grooved top of the backdoor.
5. Use one finger to push down the latch arm to snap into place.
to remove the hero3 camera from the housing:
1. Grip the housing with left hand.
2. Using right hand, place thumb to left side of arrow and index finger just
below latch arm.
3. Pinch fingers together, sliding arrow to the right.
4. Use fingertips to pull upward, allowing latch arm to swing to fully
upright position.
5. Lift hinged arm over the housing and remove the HERO3.
To close properly, be sure grooved sections of the latch arm and the backdoor
are hooked.

caMera asseMblY

59