Advertisement
1
SETTING UP THE MIMESIS 20H (Ctd.)
1.3
POWER SUPPLY (Ctd.)
The voltage selector on the rear panel allows choosing between 220V and 110V, two
additional bridges inside the Mimesis 20H allow to choose between 100V and 115V when
the voltage selector on the rear panel is on 110V, and between 200V and 230V when the
voltage selector on the rear panel is on 220V.
The power supply unit can operate indifferently with both 50 and 60 Hz AC line.
2
FIRST INSTALLATION & CONNECTIONS
Plug the AC power cord to the power supply and in a wall socket.
The converter is powered by pressing the power switch located on the rear panel. For best
sonic results, Goldmund recommends to leave the converter powered on permanently.
You can put the Mimesis 20H in standby mode to reduce the power consumption of the
unit (for more details see § 3).
When turned ON, the unit accomplishes a self test run by its internal
software. A software routine successively initializes all boards. During this
process (~5 sec) the display will show "MM20H", then the player will turn in
active mode and the (green) led of the Input 1 will keep flashing until it
detects a signal. Each input button has its own led which indicates if the
input signal is locked.
GOLDMUND MIMESIS 20H- D/A Converter 7
Hide quick links:
Advertisement
