Advertisement
4
CLEANING
Always disconnect the power cord from the wall socket before cleaning your converter.
To clean your Mimesis 20H surface, use only a soft, clean, dry or slightly damp cloth.
Avoid using domestic cleaning products and abrasive or harsh cleansers (e.g. products
containing sodium carbonate).
All inquiries relating to product servicing and operation should be referred to the local
authorized retailer supplying and supporting your Goldmund equipment.
5
TECHNICAL SPECIFICATIONS
DIGITAL INPUTS
DIGIT
DIGIT
DIGIT
AL INPUTS
AL INPUTS
AL INPUTS
Dig In 1: S/PDIF coaxial (RCA 75 Ohms)
Dig In 2: Toslink Optical
Dig In 3: S/PDIF coaxial (RCA 75 Ohms) and AES/EBU balanced (XLR 110 Ohms)
Dig In 4: S/PDIF coaxial (RCA 75 Ohms) and Toslink Optical
Dig In 5: S/PDIF coaxial (RCA 75 Ohms) and ATT Optical
Dig In 6: In6 USB AUDIO (up to 48kHz PCM stereo only)
ANALOG OUTP
ANALOG OUTPUTS
ANALOG OUTP
ANALOG OUTP
1 x Analog RCA outputs and 1 x XLR balanced analog outputs (LEFT)
1 x Analog RCA outputs and 1 x XLR balanced analog outputs (RIGHT)
D/A CONVERTER CIRCUIT
D/A CONVERTER CIRCUIT
D/A CONVERTER CIRCUIT
D/A CONVERTER CIRCUIT
2 x Goldmund ultra-linear phase proprietary circuitry enhanced Alize 7 with enhanced
dynamics
Bandwidth: 20Hz-20kHz -0.2dB typical
Typical non-linearity : below 1dB at -100dB
Typical phase error between channels: < 0.5degrees
Output voltage: 2Vrms unbalanced, 4Vrms balanced
THD < 0,001% (0dBFS, 80KHz bandwidth measurement)
UTS
UTS
UTS
GOLDMUND MIMESIS 20H- D/A Converter 10
Hide quick links:
Advertisement
