Goldmund MIMESIS 20M User Manual page 10

- The Menu Functions :
Your Mimesis 20M may be totally personalized thanks to the Menu Functions.
Your personal choice for each Menu Function is kept in machine memory
even if the machine is disconnected from power.
The existing Menu Functions (in the software release 1) are the following :
st
1 Menu Level
•
Display Brightness : to adjust the display brightness (100%, 80%, 53%,
40%, 27%, 20%, 13%)
•
Display Time : To select the display as permanent or only temporary with
the temporary time adjustable (5s, 10s, 15s, 20s, 25s, 30s)
•
Gain (only present if the Mimesis 20M is in mode converter, see level
3 below) : to separately adjust the attenuation of the output for each input
channel. Adjustable for 0 (standard position), -3dB, -6dB, -9dB, -12dB.
•
Input selection : selects either the SPDIF (default or the XLR AES/EBU
input for each input. If an optional optical input module is present, selects
(automatically displayed) Toslink or ATT.
•
Tape In 1 : selects which input channel sources are tape machines. The
Channel keys ("CH1" to "CH7") selects which input sis corresponding the
Tape In 1. The "UP" key switches between the analogue or digital inputs
group (only if the Digital Input Optional Module is installed). The
"DOWN/PWR" key cancels the channel choice to Tape in 1
•
Tape In 2: Idem for a second tape machine.
nd
2 Menu Level
To enter the second level of the menu from the 1
st
function of the 1 menu has been selected yet), keep the "SET/PWR" key
pressed and press the "REC/MENU" key.
•
Channel Name Entry : Each input may be named in clear to ease the
use of the preamplifier. The name applies to the selected input. To enter
a name, here is a memo of the keys functions :
st
Menu level (only valid if no
User manual – Goldmund MIMESIS 20M D/A CONVERTER
P9