GE Power PRO Series X600 User Manual page 90

Message
This image cannot be The file format does not support editing or the
edited. edited file cannot be edited again.
This indicates that the SD card exceeded the
Exceeded maximum maximum number of folders (999). This could
folder number. cause a long read time during the camera's
power up.
During the playback by date, the images
Too many pictures for
exceed specifications so that it is not possible
quick processing.
to play by date.
The format of the file to be viewed is not
Unable to recognize
supported or the file is corrupted so it cannot
files.
be properly read.
When you press the play button, no image
No Picture!
files exist in the camera or memory card.
When you switch from the playback mode
No continuous group
to continuous photo mode, there is no
file.
contiunous group file.
Protected! Undelet- The file is protected. The message appears
able! when you delete it.
Description Action
The message will disappear after 2 seconds.
The message will disappear after 2 seconds.
The message disappears after 2 seconds and the
camera returns to the normal playback mode.
This image message disappears only after the file is
deleted.
The message disappears 2 seconds later to return to the
photo shooting screen.
The message disappears after 2 seconds and the
camera returns to the normal playback mode.
Remove SD card and switch the lever on the side of card
to UNLOCK. Place back into the camera and try again.
The message will disappear after 2 seconds.
89