G–Dec 30 Midi Configuration; Gdec30 Midi Controls - Fender G-DEC 30 Owner's Manual

16
G–DEC 30 MIDI Configuration
In Utility Mode you can set MIDI CONTROL (menu 9) to SYNTH
or AMP. If set to AMP, data sent on MIDI channel 16 will control
the amp, and channels 1-15 will be routed to the synth. This
will present a problem if a normal MIDI song is played with
music on channel 16 (which could affect the amp settings in
unexpected ways). In this case you can either delete channel
16 or move it to a different channel. If MIDI CONTROL is set
to SYNTH, all MIDI data will be routed to the synth. When
If the MIDI CONTROL is set to AMP the following commands can be used (on CH 16).
Preset Num
Amp Volume
Synth Volume
Start/Stop MIDI
Play
Record
Overdub
Data Increment
Data Decrement
Amp Gain
RVB Level
FX Level
FX Param1
FX Param2
FX Param3
FX Param4
Select Song
G-DEC 3O G-DEC 3O

GDEC30 MIDI Controls

Amp Control
Program Change
f e n d e r . c o m f e n d e r . c o m
songs are created in the COMPOSE Mode, program changes
will be saved in the song on channel 16 regardless of the MIDI
Amp Control setting, but the program changes will only work
during playback if the amp is set to AMP. MIDI on channel
16 is also passed from the MIDI input jack to the DSP during
playback of songs or patterns if the MIDI CONTROL is set to
AMP.
Control Type
0-99,127=Tuner
CC#07
CC#11
CC#85
CC#86 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#87 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#88 Don't care (Ignored if the
amp is busy playing a
pattern or song)
CC#96
CC#97
CC#102
CC#108
CC#110
CC#111
CC#112
CC#113
CC#114
CC#119 0-63 (Ignored if the amp
is busy playing a pattern
Value Range
0-127
0-127
Don't care
Don't care
Don't care
0-127
0-127
0-127
0-127
0-127
0-127
0-127
or song)