Restore Default Settings; Raw Nvram Data; Advanced Adapter Settings - Qlogic QLA22xx board Installation Manual

A – Fast!UTIL
A.2.3

Restore Default Settings

The Restore Defaults option from the Configuration Settings menu restores the
QLA22xx board default settings.
A.2.4

Raw NVRAM Data

This option displays the adapter's NVRAM contents in hexadecimal format. This is
a QLogic troubleshooting tool; you cannot modify the data.
A.2.5

Advanced Adapter Settings

From the Configuration Settings menu in Fast!UTIL, select Advanced Adapter
Settings. The default settings for the QLA22xx host adapter board are listed in
table A-2 and described in the following paragraphs.
Setting
Execution Throttle
Fast Command Posting
>4GByte Addressing
Luns per Target
Enable LIP Reset
Enable LIP Full Login
Enable Target Reset
Login Retry Count
Port Down Retry Count
Drivers Load RISC Code
Enable Database Updates
Disable Database Load
IOCB Allocation
Extended Error Logging
FC0151103-00 E
Table A-2. Advanced Adapter Settings
1-256
Enabled or Disabled
Enabled or Disabled
0, 8, 16, 32, 64, 128, 256
Yes or No
Yes or No
Yes or No
0-255
0-255
Enabled or Disabled
Yes or No
Yes or No
1-512 buffers
Enabled or Disabled
Configuration Settings
Options Default
16
Enabled
Disabled
8
No
Yes
No
8
8
Enabled
No
No
256 buffers
Disabled
A-3