Part 1 - Package Contents - Q-See QS206 Quick Installation Manual

PART 1 - PACKAGE CONTENTS

Color Cameras with Stands
QS206 DVR
Pre-Installed
Hard Drive
Power Supply
for DVR
Remote Control
The appearance of contents may differ from images shown.
Manual and
Software CD
1 BNC(M) to RCA(M) Ethernet
Adapter Cable Cable
60-Foot
Power Supply and
Power and Video Cable
4- or 8-Way Splitter
(One per camera)
USB 2.0 Grounding Cable
Mouse Not used in North America
Revised 6/29/11
PART 2 - DVR CAMERA AND POWER CONNECTIONS
STEP 1: Connect the Cameras
manuals and
softwa re
QS Serie s
QS408 • QS20 6
to the Cables
1B
1C
Connect the remaining
connector to one of the 1 2 3 4 5
ends on the power
splitter. Repeat for all
DC +12V VGA RJ45 USB
cameras.
IN ALM IN
STEP 3:
Connect the other power supply to the DVR .
STEP 2:
Connect the single end
of the power splitter to
the included power supply.
STEP 4:
Connect both power supplies to
a surge protector.
IMPORTANT! It is STRONGLY recommended to use a surge protector that
is UL-1449 rated. Look for a clamping voltage of 330 or lower, a Joule rating
of at least 400 and a response time of 10 nanoseconds or less.
Connect both camera leads to the matching
1A
ends on the power/video cable.
Repeat for all cameras.
Attach the BNC connector on the power/video cable to a
Video In port on the DVR. Repeat for all cameras.
VIDEO IN
6 7 8 9 10 11 12 13 14
16 15
AUDIO IN AUDIO CVBS OUT
OUT
STEP 5:
Connect thesurge protector
to an outlet.