Table of Contents
Advertisement
STEP8
The system will access the DVR automatically after finishing installation. The Network Client interface will be
displayed in IE browser, refer to Figure4-1.
Notice: When the Network Client is running on VISTA operating system, you also need set relational ActiveX parameters. Steps for setting
parameters are as follows:
1. Open IE browser, then select 'Internet Options > Advanced > Security'.
2. Enable 'Allow software to run or install even if the signature is invalid' and 'Allow active content to run in files on my computer '.
3.Click "OK" to finish the settings.
4.2 Main Interface
The function buttons of the remote surveillance software are shown in Fig4.2.
QSD2304L DVR User's Manual
Fig4.2 Main Interface
45
Advertisement
Table of Contents
