Chapter 4 Remote Surveillance; Accessing The Dvr; Accessing The Dvr Through Network - Q-See QSD2304L User Manual

4.1 Accessing DVR
Our DVR supports control through an Internet Explorer (IE) browser, to access through IE you need to download and
install ActiveX controls for remotely controlling the DVR.
Before remotely controlling the DVR, you need to connect the DVR to the router by Ethernet cable. If you access the DVR
through the internet, you need to setup DVR and router parameters first (Refer to Appendix D).
DVR can support five users logging in and operating the Network Client at the same time.
4.1.1 Accessing DVR through a local network (LAN) (Refer to Appendix D for DVR network setup)
When your computer is connected to a LAN, you can access DVR through an IE browser by following these steps:
STEP1 Double-click the IE browser icon to open the IE browser.
STEP2 Put the IP address of the DVR in IE address bar and press
"Enter" key.
STEP3 Install ActiveX controls in displayed page.
STEP4 After installation is completed, the system will connect to DVR automatically. It will display the Network Client
interface, refer to Figure4-1.
42
42
QSD2304L DVR User's Manual

CHAPTER 4 Remote Surveillance