Advertisement
IMPORTANT SAFEGUARDS AND OPERATIONS
THERMAL PROTECTION
This appliance is equipped with a self-resetting
thermal protector. Vacuum will shut off if the
inlet is plugged or if the airflow is severly
restricted. If this occurs, please allow a few
minutes for the thermal protector to cool and
reset itself.
OPERATION INSTRUCTIONS
Place the paper filter bag over the flanged
1.
inlet on the inlet and secure with slide on
filter retention device.
2.
Make sure filter is firmly seated in lid.
3.
When not in use, store tools as shown
below.
10702 N. 46th Street • Tampa, FL 33617
(813) 971-2223 • Fax (813) 971-6090 • www.pullman-holt.com
WARNING
UNPLUG the vacuum when working on
the motor or any electrical part.
CHECK the condition of all electrical
cords before each use.
DO NOT lubricate the motor; it is
equipped with sealed bearings.
The appliance has NO user serviceable
parts.
PROPER STORAGE
When the vacuum is not in use, it should be stored
in a dry place.
ELECTRICAL CORD CARE
NEVER stretch the cord tightly between the vacuum
and the outlet. A cord that is stretched or pulled will
not function properly and creates a danger. After
vacuuming, unplug the cord and wind it up loosely.
DO NOT wind the cord up by wrapping around your
hand and elbow.
Advertisement
