Zenith SENTRY 2 SL2753S Operating Manual & Warranty page 21

SETUP MENU
'--SETUPMENU ' SETUP MENU--
• .). A UI"O CH. SEARCH
CH. ADDIDEL
CH. LABELS *
TUNING BAND
AUTO RNE 1LINE
CLOCK SET
CAPTIONS
CH. BACKGROUND
START
SETUP Menu
* Some models
-_ CLOCK SET
CAPIIONS
CH. BACKGROUND
SETUP Menu While AUX Channel is Being Used
(To get SETUP Menu on ]left, select a regular channel)
AUTO CH. (Channel) SEARCH
Purpose
Finds all available channels and stores them in memory for
access by CHANNEL (CH) Up/Down.
Use AUTO CH. SEARCH only when you first install your
TV, or when you permanently change the connections to
the TV. For example, when you replace the antenna with a
cable-TV system.
Programmed channels are stored in protected memory, and
are not affected by a power outage.
Before Using AUTO CH. SEARCH
Connect and turn ON all external equipment, such as cable
TV decoder, VCR, etc.
NOTE: AUTO CH. SEARCH is not displayed while AUX
channel is being used.
To Use A[FI'O SEARCH
I. AUTO CH. SEARCH should be selected if you
followed the "Basic Menu Operation" given in the
"On-Screen Menus" section.
2. Press ADJUST (ADJ) Left/Right to start the
AUTO CH. SEARCH, the status of the search is
shown in the display. When the search is complete,
you can watch the TV program of your choice.
When Some Channels Are Not Found
AUTO CI-LSEARCH finds only active cham_ls and gores
them in the favorite channel memory. You can a_klchannels to
those stored in memory by using lhe CH. ADD/DEL option.
If you have difficulty tuning some channels, you may have to
manually change the TUNING BAND and AUTO FINE
TUNE. Refer to respective option for details.
When Only AUX Channel Is Found
You may have used AUTO CH. SEARCH without having a
signal source (antenna, cable-TV, etc...) connected to the TV.
In which case, no channels are slored in the favorite channel
memory, and the 'IV operates only on the AUX channel
To resolve this condition, cotm_ct a signal souro_, turn signal
source ON, if needed, and u_,eAUTO CH. SEAaRCH again.
NOTE: AUX (Auxiliary) charmel is operational only on
TVs having separate video and audio inputs for VCR opera-
tions.
SETUP MENU
"_AUTO CH. SEARCH
CH. ADDIDEL
TUNING BAND
AUTO FINE 11JNE
CLOCK SET
CAP]IONS
CH. BACKGROUND
START
DLZFERMINING TUNING BAND
Determining
Tuning Band
Selecting Auto Ch. Search
TONING BAND IS
CH r"] is FOUND
kLr[O CI-L SEARGq HAS COMPI.EI_
TUNING BAND LS
D CHANNELS FOUND
While Searching for
Active Channels
When Search is
Complete
CH 2
S'I_REO
When Returning to
Channel,/Audio Display
z_o 8 -- 1