Zenith SENTRY 2 Z19A02 Operating Manual & Warranty page 8

QUICK SETUP GUIDE
1. CONNECT THE POWER
AFTER you hav e connected the neces-
sary cable(s) to the jacks on the back of
the TV, plug yourTV's power cord into
a standard AC power outlet for 120
volt, 60Hz. AC current. Make sure you
do not plug the TV into an outlet con-
trolled by a switch.
Turn on the TV by using the On/Off
switch on the TV,
2. INSTALL THE BATTERIES INTO THE REMOTE
1. Open the battery compartment by
pressing in on the tab and lifting the
cover off.
2. Place the batteries into the compartmenl
matching plus (+) and minus (-) with
the: details shown in the compartment.
3. Replace the cover.
Peu sh tab in to
move cover
Use 2 size AA batteries
Continued on next page.
3197-0
2wl