Attaching The Seat; Standard Adjustment Seat; Quick Adjustment Seat; Knob Adjustment Seat - Yard-Man 771 Operator's Manual

WARNING
Before operatingthis
machine,make sure
the seat is engaged in
the seat stop; stand
behind t he machine
and p u, b ack on seat
fu,y engaged
into stop:
NOTE: Forsh pping rea:
s0nsl Seatsareeither
fastenedto the tractor
seat's pivot braCketWitt
a plastiCtie, or mounted
backward to the pivot
bracket. In either case;
free the seat form its
shipping p0sition and
remove the two Box
screws (or knobsion
models so equipped)
from thebottom of seat
before proceedingwith
applicable instructions:
Attaching The Seat
Seatstyles vary bytractormodeland thereare three
differentstyles available:
• StandardAdjustment
• QuickAdjustment&
• KnobAdjustment
If the seatfor yourtractordid notcome attached,referto
Figure4, Figure5, and Figure6 to identifyyourtractor's
seat styleand followthe applicableinstructionsbelowto
attachit.
Figure 4
NOTE:Forshippingreasons,seatsare eitherfastened
to the tractorseat'spivot bracketwith a plastictie, or
mountedbackwardto the pivot bracket.Ineithercase,
freethe seat form its shippingpositionand removethe
two hex screws(or knobs,on modelsso equipped)from
the bottomof seatbeforeproceedingwith applicable
instructionsbelow.
Standard Adjustment Seat
1. Positionthe shoulderscrews(foundon the baseof the
seat) insidetheslot openingsin the seat pivot bracket.
Figure4.
2. Slide the seatslightlyrearwardin the seat pivot
bracket,liningup the rearslots in the pivot bracket
with the remainingtwo holesin the seat'sbase.
3. Selectdesiredpositionforthe seat,and securewith
the two hex screwsremoved earlier.See Figure4.
Quick Adjustment Seat
NOTE:If your seatwas shippedmountedbackwardson
the seat pivotbracket,pull outthe tab foundon the seat
stop and hold it open whileslidingthe seatoff the seat
pivot bracket.See Figure5.
Figure 5
1. Line up the plasticseat spacerswith the slotsin seat
pivot bracket.
2. Slide seat in untilfront seat spacerengagesthe seat
stop.See Figure5.
WARNING" Before operating this
machine, make sure the seat is
engaged in the seat stop, stand
behind the machine and pull back
on seat until fully engaged into
stop.
Figure 6
Knob Adjustment Seat
1. Positionthe shoulderscrews(foundon the baseof the
seat) insidetheslot openingsin the seat pivot bracket.
Figure6.
2. Slide the seatslightlyrearwardin the seat pivot
bracket,liningup the rearslots in the pivot bracket
with the remainingtwo holesin the seat'sbase.
3. Selectdesiredpositionforthe seat,and securewith
the two knobs removed earlier.See Figure6.
10