Commonwashing Problems - White-Westinghouse SWXG831HQ4 Use And Care Manual

27" (69 cm) wide laundry center washer- dryer
Table of Contents

Advertisement

Common
Washing Problems
Mal_ywashing problems invoh,e poor soil and stain removal, residues of lint and scum, and fabric damage. Forsatisfactorywashing
results, follow these suggestions provided by The Soap and Detergent Association.
PROBLEM
POSSIBLE CAUSES
SOLUTIONS
PREVENTIVE
MEASURES
Blue stains
.Detergent
or liquid fabric softener
.If caused by detergent,
mix 1 cup (240
.Add
detergent
before wash load. Then
did not dissolve or disperse,
ml) white vinegar with 1 quart (.95 L)
start
washer.
water in a plastic container. Soak item 1
.Add
fabric softener
to dispenser
hour. Rinse.
(available on some models).
• If caused by fabric softener,
rub stains
,Dilute
fabric softener with water.
with bar soap. Wash.
Discoloration,
.Not enough detergent.
.Rewash with
correct amount of
,Sort items by soil level and color.
graying
,Wash water temperature
too
detergent
and hottest water safe for
.Use correct amount of detergent,
hottest
low.
fabric. Add bleach safe for fabric,
water and bleach safe for fabric
.Incorrect
sorting.
.Treat
with prewash stain remover or
,Use correct
amount of detergent
and
,Not enough detergent,
liquid detergent,
hottest water safe for fabric.
.Undiluted
liquid fabric softener
.Increase
detergent
and water
.Do
not pour
fiquid fabric
softener
poured directly on fabric,
temperature.
Rewash.
directly
on fabric.
See package
.Rub fabric softener stains with
bar
directions
or Washing
Procedures
for
soap.
proper diluting.
Greasy, oily stains
Holes, tears, or
snags
,Incorrect
use of chlorine
bleach.
.Unfastened
zippers,
hooks,
buckles.
,Rips, tears and broken threads.
.Overloading
the washer.
.Degradation
of fabric.
.May
be irreversible if rips, tears and
seams col]not
be mended.
.Never
pour chlorine bleach directly on
fabric.
,Check condition
of items before washing.
See Washing
Procedures
for preparing
and loading the wash load.
Lint
,Incorrect
sorting.
,Tissues
left in pocket.
,Overloading
the washer.
,Not
enough
detergent.
,Undissolved
detergent
has left
residue.
,Static
cling is attracting
lint.
,Load
washed
too long
• Reduce load size. Rewash using correct
water temperature,
water level, and
amount of detergent.
• Add
nonprecipitating
water conditioner
to wash water.
• Add liquid fabric softener to final rinse.
• Dry load in dryer.
.Remove lint with lint brush or roller.
,See
Washing
Procedures
for sorting
and preparing the wash load.
.Do not overload washer.
,Use correct amount of detergent,
water
temperature
and water level
Pilling
(Fibers break off,
ball up and cling to
fabric)
,Pilling
is normal with synthetic
and permanent
press fabrics.
This is due to abrasion from
normal
wear.
.Use a lint brush or shaver to remove
pills.
.Use fabric softener
in the washer to
lubricate
fibers.
,When
ironing, use spray starch or fabric
finish on collars
and cuffs.
.Turn items inside out to reduce abrasion.
Residue
or powder
on dark items;
Stiff,
harsh fabrics.
.Undissolved
detergent.
.Some
nonphosphate
granular
detergents
can combine
with
hard water minerals to form a
residue.
• Reduce load size.
• Add dissolved detergent
to tub . Rewash
load.
• Mix I cup (240 ml} white vinegar to I
gallon (3.8 k) warm water in plastic
container. Soak item. Rinse and rewash.
.Increase water temperature
using hottest
water safe for fabric.
.Do not overload washer.
.Use liquid detergent
or use
nonpredpitating
water conditioner
with
nonphosphate
granular detergent.
Wrinkling
Yellow buildup of
body soil on
synthetic fabrics
,Overloading
the washer.
.Reduce
load
size.
• Rinse in cold water with liquid fabric
softener.
.Do not overload washer.
.Remove
items from washer as soon as
cyde is completed.
.Use liquid fabric softener.
.Agitation
time too short.
,Wash water temperature
too
low.
.Not enough detergent.
• Soak in detergent
booster or product
containing
enzymes.
• Wash in hot water using full permanent
press cycle. Increase detergent.
.Add
bleach safe for fabric or, treat with
color remover.
,Wash
synthetics frequently
hot water
and correct water
level.
Yellow
or brown
rust stains
.Iron or manganese in water
supply, water
pipes, or water
heater.
• To restore discolored load of whites,
use rust remover safe for fabric.
Do not use cblorine
bleach
to remove
rust stains, it may intensify
discoloration.
.Use nonprecipitating
water softener.
,Before
washing,
run hot water for a few
minutes to clear lines.
.Drain
water
heater occasionally.
,For an ongoing problem, install an iron
filter in your water supply syslem.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents