Blink Detection - FujiFilm FINEPIX JX280 series Owner's Manual

BLINK DETECTION

BLINK DETECTION
When using Intelligent Face Detection, the
camera can display a warning after taking the
picture if it detects that someone has blinked.
You can then check the person's eyes and re-take
the picture if necessary.
To use this feature, make sure that FACE
DETECTION is set to ON (pg. 24) and that
J BLINK DETECTION is set to ON (pg. 75) in
the setup menu.
If an option other than OFF is selected for
a IMAGE DISP. , a warning will be displayed
if the camera detects subjects who may
have blinked when the picture was taken. If
ZOOM(CONTINUOUS) is selected, you can press
the F button to zoom in on these subjects; a
new face is selected each time the F button is
pressed.
BLINK DETECTION
FACE ZOOM
STORE ERASE
26
BLINK DETECTION
NEXT
STORE ERASE
If you are satisfied with the results, press MENU/OK
to save the image. If you want to try again, press
the selector up to delete the image and then
take another shot.
C Caution
If a IMAGE DISP. is set to OFF, the camera will not
detect closed eyes even if BLINK DETECTION is set
to ON.
B Intelligent Face Detection