Advertisement
a. Guide to Configure RAID 0
STEP 1: Select the option Create Array in the main menu of BIOS configura-
tion utility, then press <Enter> key.
STEP 2: Select the option Array Mode, then press <Enter> key to display the
pop-up menu of RAID system setting.
STEP 3: Select RAID 0 for performance from the menu and press <Enter>.
From this point, you may choose to auto-configure the RAID array by
selecting Auto Setup for Performance or manually configure the RAID
array for striped sets. Please continue with the next step if you want to
manually configure the RAID array. Otherwise, proceed to step 3-4.
3-1.
Select the option Select Disk Drives, then press <Enter>. Use arrow
keys to select disk drive(s), then press <Enter> to mark selected drive.
An asterisk is placed before the selected drive.
3-2.
Select the option Block Size, then press <Enter> to set array block
size. A list of valid array block sizes are displayed on a pop-up menu.
Use arrow keys to move selection bar on items and press <Enter> to
select.
3-3.
Select the option Start Create Process and press <Enter> to setup
hard disks for RAID system.
3-4.
Then the confirmation message appears:
The data on the selected disks will be destroyed. Continue? (Y/N)
Press <Y> to confirm or <N> to return to the configuration options.
6
Advertisement
