Fluke Calibration MET Plus Version 7 Workshop Manual

MET/CAL
®
Metrology Software Procedure Writing
Computer-Based Training
A CD that shows
you how to use the
MET/CAL Editor to
®
develop a proce-
dure using Function
Selection Codes
This interactive self-paced
course uses simulation of
the MET/CAL Editor func-
tion to explain the use of the
most basic, frequently used
Function Selection Codes
(FSC) to write an automated
MET/CAL procedure.
Interactive and easy-to-use formats are
only a few of the features
• Familiar web interface for easy learning
• Simulated MET/CAL Editor screens to "get the
feel" of the software
• A "ghost procedure writer" shows how to use
some of the more complex procedure statements
• An online procedure development manual with
examples of the basic FSC use
• Book marking allows you to return to a page if
you must exit and start again
• Periodic examinations to show learning progress
• If the course is completed successfully, you can
print a completion certificate
Plus Version 7
Advantages of computer-based training
Computer-based training (CBT) provides you with
a cost-efficient and convenient way to learn the
basic use of the MET/CAL Editor to write automated
procedures. You may use the CBT to supplement
instructor-led courses or gain an overview of the
features of the basic FSCs. This dynamic, interactive
CBT provides you with the training you need when
you need it.
• Better class training and preparation. Get a jump
• An ongoing reference guide. The CBT is an
• Choose the learning pace that is right for you.
start on your MET/CAL classroom training.
excellent reference that you can turn to if you
need a refresher on writing a procedure.
Screens with a familiar web browser interface
lead you through 16 exercises and two progress
exams to test your knowledge.
General Technology
Workshops